 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com White PLCC4 Surface Mount LED (120 Viewing Angle) OVSAWBCR9 x x x x High luminous intensity High efficiency, 3-chip device Emission color: x = 0.29, y = 0.30 Pb-free Product Photo Here The OVSAWBCR9 combines three die in a single package to provide high intensity light from a surface mount package. Light output is optimized by an interior reflector and the wide viewing angle adds flexibility for applications ranging from hand-held appliances to automotive interiors. Applications x Backlighting of full color LCD x Automotive interior lighting x General lighting x Coupling into light guides x Entertainment equipment Part Number OVSAWBCR9 Material InGaN Emitted Color White Intensity Typ. 1900 mcd Lens Color Water Clear 1,3,4 CATHODE 2 ANODE DIMENSIONS ARE IN INCHES AND [MILLIMETERS]. RoHS Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 11/05 Page 1 of 5 White PLCC4 Surface Mount LED OVSAWBCR9 Absolute Maximum Ratings Storage Temperature Range Operating Temperature Range Soldering Temperature (5 second maximum) Forward Current 1 TA = 25o C (on metal core PCB1) unless otherwise noted -40 ~ + 85 C -40 ~ + 100 C 260 C 25 mA 100 mA 5V 150 V 110 mW Peak Forward Current (10% Duty Cycle, 1 KHz)1 Reverse Voltage Electrostatic Discharge Power Dissipation Note: 1. Maximum forward current for each die. Electrical Characteristics SYMBOL IV VF IR 2 x y 1/2 TA = 25o C (on metal core PCB1) unless otherwise noted PARAMETER Luminous Intensity Forward Voltage Reverse Current 2 2 1 MIN 1045 ---------------- TYP 1900 3.5 ---120 0.29 0.30 MAX ---4.0 50 ---------- UNITS mcd V A deg ------- CONDITIONS IF = 20 mA IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA 50% Power Angle Chromaticity Coordinates3 Notes: 1. When three LED die are operated simultaneously. 2. For each die. 3. The C.I.E. 1931 chromaticity diagram. Standard Bins (IF = 20mA) Lamps are sorted to luminous intensity (IV) and chromaticity coordinates (x, y) bins shown. Orders for OVSAWBCR9 may be filled with any or all bins contained as below. Rank Chromaticity Coordinates Rank Chromaticity Coordinates x y x y A0 0.280 0.264 0.283 0.296 0.248 0.267 0.305 0.276 B1 0.287 0.283 0.330 0.330 0.295 0.305 0.360 0.339 B2 C0 0.296 0.287 0.330 0.330 0.330 0.330 0.361 0.356 0.276 0.295 0.339 0.318 0.318 0.360 0.385 0.351 Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. Pb content <1000 PPM. 3. To designate luminous intensity ranks, please contact OPTEK. 4. Part is sensitive to static electricity and precautions must be used when handling products. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .1 11/05 Page 2 of 5 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com White PLCC4 Surface Mount LED OVSAWBCR9 CIE Chromaticity Diagram Y X OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 11/05 Page 3 of 5 White PLCC4 Surface Mount LED OVSAWBCR9 Typical Electro-Optical Characteristics Curves 500 400 300 mA % TA = 25 100 75 50 25 0 Half Power WL = 150 nm TA = 25 200 100 0 2.8 3.0 3.4 V 3.8 4.2 4.6 400 500 600 nm 700 800 Forward Current vs Forward Voltage Relative Luminous Intensity vs Wavelength 100 TA = 25 1000 100 % % 100 10 10 1 100 101 mA 1 102 103 -60 -40 -20 0 20 40 60 80 100 C Relative Luminous Intensity vs Forward Current Relative Luminous Intensity vs Ambient Temperature 0 TA = 25 10 20 50 40 30 mA 30 1.0 0.9 0.8 0.7 0 40 50 % 60 70 80 90 0.6 20 10 0 20 40 C 60 80 100 0.5 0.3 0.1 0.2 0.4 Forward Current vs Ambient Temperature Radiation Pattern OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .1 11/05 Page 4 of 5 OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com White PLCC4 Surface Mount LED OVSAWBCR9 Reel Dimensions: 7-inch reel Carrier Tape Dimensions: Loaded quantity 2000 pieces per reel Progressive Direction Polarity TOLERANCE = 0.1 MM ANGLE = 0.5 DIMENSIONS ARE IN MILLIMETERS Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. -- 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.1 11/05 Page 5 of 5 |
Price & Availability of OVSAWBCR9
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |